Scientific Publications

Utilization of Solar Energy for Splitting Water, S. Rajadurai, Ind. Chem. Manufacturer, XVII, 8-9 (1979).
Spectroscopic and Cryoscopic Studies of Bromine in Carbon Tetrachloride and Nitrobenzene, S. Rajadurai, J. Rajaram, V.K. Ramakrishna and J.C. Kuriacose, Acta. Cienc. Indica, (ser) Chem., 6(2) 61 (1980).
Acidity and its Role in Zeolite Catalysis, V. Mary Selvi and S. Rajadurai, Ind. Chem. Manufacturer, 1, 1-10 (1983)
Gravimetric Adsorption Measurements using Linear Variable Differential Transformer, S. Rajadurai, Ind. Chem. Manufacturer, 1, 1-6 (1983).
Recent Developments on the Studies of Clathrates, M. Chacko, and S. Rajadurai, Ind. Chem. Manufacturer, 21, 7 (1983).
Zeolites and their Structural Properties, M.A. Jachintha and S. Rajadurai, Ind. Chem. Manufacturer, 2, 1-25(1984).
Effect of Ni (II) Substitution on Acidity and Catalytic Activity of Zeolites, V.G. Anand and S. Rajadurai, J. Bang, Acad. Sci., 9, 113-116 (1985).
Effect of Be (II) and Ni (II) Substitution on Acidity and Catalytic Activity of A-type Zeolites, V. Mary Selvi, A. Selvanathan and Rajadurai, Mat. Chem. and Phys., 12, 483-48 (1985).
Thermogravimetric Analysis and Application of Inorganic Clathrates, M. Chacko and S. Rajadurai, J. Bang, Acad. Sci., 10, 31-36 (1985).
A Design for a Thermobalance, S. Rajadurai, Chemistry Education, 3, 43-46 (1986).
Nickelocene: A Universal Quencher of Organic Triplets, Rajadurai and P.K. Das, Chem. Phys. Lett, 129, 244-251 (1986).
Dehydration of Ethanol on Filtrol and Modified Filtrols, Rajadurai and T.M. Geetha, Mat. Chem. and Phys., 15, 173-183 (1986).
Catalytic Activity of the 1:1:1 Zn, Cr and Fe Mixed Oxide: Mechanistic Study of the Ketonization of Acetic Acid, S. Rajadurai and J.C. Kuriacose, Mat. Chem. and Phys., 16, 17-29 (1986).
Evidence for Triplet-Doublet Energy Transfer in the Naphthalene-Benzophenone System in Tetrahydrofuran, H. Hiratsuka, S. Rajadurai, G.L. Hug, P.K. Das and R.W. Fessenden, Chem. Phys. Lett., 137, 255-260(1987).
Structural Relaxation in 1, 2, 6-Trimethyl-3, 5-Diphenyl-4-Pyridone Triplet, S. Rajadurai and P.K. Das, J.Photochem, 40, 3410354 (1987).
Reactivity and Photo Physical Behavior of Chromone Triplet. A Laser Flash Photolysis Study, S. Rajadurai and P.K. Das, Canad. J.Chem., 65, 2277 (1987).
Deoxygenation of Cresol on Houdry and Modified Houdry Catalysts, M.A. Jachintha and S. Rajadurai, Bull. Soc. Chim. Belg., 96, 83-88 (1987).
Reactivity of Ternary Oxides of Zn, Cr, and Fe for Ketonization of Acetic Acid, S. Rajadurai and J.C. Kuriacose, Ind. J.Chem., 26A, 384-8 (1987).
Catalytic Study of Binary Oxides of Zn, Cr and Fe for Decarboxylation Reaction, S. Rajadurai and J.C. Kuriacose, Ind. J.Chem., 26A, 7-11(1987).
Synthesis Structural Characterization and Catalytic Study of ZnCrFeO4 Spinel, S. Rajadurai, Mat. Chem. and Phys., 15, 459-466 (1987).
Quenching of Singlet Oxygen by Nickelocene, S. Rajadurai, K. Bhattacharyya and P.K. Das, J.Photochem., 37, 33-40 (1987).
Sensitized Photo rearrangements of 3, 3, 5 Triary-2 (3H)-Furanones to 3, 4, 5 – Triaryl-2 (5H)-Furanones. Steady State and Laser Flash Photolyis Investigation, K.R. Gopidas, S. Rajadurai, P.K. Das and M.V. George, J.Org, Chem., 52, 2831-38 (1987).
Micellar Effects on the Photo processes in Retinyl Polyenes, K. Bhattacharyya, S. Rajadurai and P.K. Das, Tetrahedron, 43, 1701-11 (1987).
Photo Transformation of Epoxyindanone Adducts. Steady State and Laser Flash Photolysis Study, D. Ramaiah, S. Rajadurai, P.K. Das and M.V. George, J.Org, Chem., 52, 1082-88 (1987).
Transient Phenomena in Pulse Radiolysis of Retinyl Polyenes, K. Bhattacharyya, S. Rajadurai and P.K. Das, Photochem. Photobiol., 47, 73-83 (1988).
Photochemistry and Photophysics of p-Benzoyl phenyl Diphenylmethyl Radical in Solution, S. Rajadurai, O. Valdes, S.M. Linden, A. Zakrewski and D.C. Neckers, Tetrahedron Letts. 29, 5109 (1988).
Fluorescence Studies of Furanoxy Radicals, K. Bhattacharyya, P.K. Das, R.W. Fessenden, M.V. George, K.R. Gopidas, H. Hiratsuka, G.L. Hug, S. Rajadurai, and A. Samanta, J.Am.Chem. Soc., 111, 3542-48 (1989).
Pathway for Carboxylic Acid Ketonization on Transition Metal Oxides, S. Rajadurai, Selected Studies in Homogeneous and Heterogeneous Catalysis, IIT Madras, P-63081 (1990.)
Solid Oxide Solution as Catalysts. A Comparison with Supported Pt, S. Rajadurai, Boazhen Li, C.B. Alcock and J.J. Carberry, Catal. Lett., 4, 43-48(1990).
Catalytic Oxidation of Carbon Monoxide over Superconducting Oxides La2-xSrxCuO4, S. Rajadurai, C.B. Alcock and J.J. Carberry, J.Catal. 131, 582-589 (1991).
Catalytic Oxidation of Carbon Monoxide Over Mixed Oxide Solutions of La.8Sr.2CrxV1-xO3, S. Rajadurai, N. Gunasekaran and J.J. Carberry, J.Catal (in press).
Surface Characterization and Catalytic Properties of La1-xAxMO3 Perovskite Type Oxides, Part II. Studies on La.95Ba.05 MO3 (M=Mn, Fe, Co) Oxides, N. Gunasekaran, S. Rajadurai, J.J. Carberry, N. Bakshi and C.B. Alcock, Solid State Ionics, (in press).

Surface Characterization and Catalytic Properties of La1-xAxMO3Perovskite Type Oxides, Part I. Studies on La.95Ba.05 MO3 (M=Mn, Fe, Co) Oxides, N. Gunasekaran, S. Rajadurai, J.J. Carberry, N. Bakshi and C.B. Alcock, Solid State Ionics, 73, 1-7 (1994).
Advanced Converter System for High Temperature Exhaust Aftertreatment, S. Rajadurai, B. Snider, S. Gulati, M. Brady, SAE 970265.
CFD Investigation of Thermal Fluid Flow and Conversion Characteristics of the Catalytic Converter, C. Chung, S. Rajadurai and L. Geer, SAE 99-01-0462.
Shoebox Converter Design for Thin wall Ceramic Substrate, S. Rajadurai, L. Geer, C. Chang, H. Cheng, T. Carlson, SAE 99-01-1542.
Single Seam Stuffed Converter Design for Thinwall Substrates, Rajadurai, M. Tagomori, J. Berryhill, A. Baig and B. Snider, SAE 1999-01-3628.
Catalytic Converter Design, Development, and Optimization using Computational Analysis and Engineering, S. Rajadurai, L. Geer, C. Chang, H. Cheng, and F. Pan, SAE 990050.
Catalytic Converter Design, Development and Manufacturing, S. Rajadurai and M. Tagomori, SAE 2000-01-1417.
Numerical Simulation and Experimental Validation of the Catalytic Converter Cool Down Process, Cathy Chung, Larry Geer and S. Rajadurai, SAE 2000-01-0204.
Catalytic Converter Design for Manufacturing using Monte-Carlo Simulation, M. Tagomori and S. Rajadurai, SAE 2000-01-2878.
Ultra Thinwall Ceramic Substrate Converter Canning and Design Validation, S. Rajadurai, Dave Casebeer, Scott McBryde, Mauro Tagomori, SAE, Fuels and Lubricants, 2001.
Computer Application in Converter Development from Concept to Manufacturing, S. Rajadurai, SAE 2002-28-0046.
Effect of Aspect Ratio on Pressure Drop and Acoustics in Diesel Particulate Filters, A. Katari, M. Syed , M. Sickel and S. Rajadurai, SAE 2004-01-0695.
Edge Seal Mounting Support for Diesel Particulate Filters, SAE 2005-01-3510.
Wiremesh Mounting System for Low Temperature Diesel Catalytic Converters, SAE 2005-01-3508.
Durable Catalytic Converter Mounting with Protective and Support Seals, SAE 2006-01-3419.
Improved NOx Reduction using Wiremesh Thermolysis Mixer in Urea SCR System, SAE 2008-01-2636.
Environmental Accountability for a Sustainable Earth, S. Rajadurai and Prasanti Raveendran, Indian Journal of Science and Technology, 4, 355-360 (2011).
Muffler Development in Virtual Environment, Sivanandi Rajadurai and Madusuthanan, International Journal of Automotive Technology, (in press).
CO₂ Reduction – A New Challenge, Sivanandi Rajadurai and Abinayaa Raajamony on IJSAT (in press).
Carbon Dioxide Fixation – The Must and The Path, S. Rajadurai and R. K. Anulatha, International Journal of Science and Advanced Technology, 164-171, Vol. 2, No 5 (2012).
Project Management Process – An Art, S. Rajadurai and Manoj Vasanth Sigh. R, International Journal of Economics, Education and Management, 76-87, Vol. 1, No 1 (2013).
Durability Improvisation of Exhaust System Resonator Internal, Sivanandi Rajadurai, N. Suresh, P.A. Sairaman and S. Ananth, SAE 2013-26-0053.
Modal Analysis for Exhaust Manifold in Hot Condition, Is there a Need? S. Rajadurai, M. Guru Prasad, R. Kavin and M. Sundaravadivelu, International Conference on Automotive Materials & Manufacturing: AM&M, SAE 2014-28-0036, Pune, April, 2014.
Partial Controlled Canning for Thin Wall & Ultra Thin Wall Substrates – A New Approach, Sivanandi Rajadurai, Prakash Krishnan, Naveen Sridharan, Manimaran Sethurama subramaniyam, Commercial Vehicle Engineering Congress, SAE 2014-01-2348, Rosemont, USA, October, 2014.
Influence of Coupled Analysis for a Hot End Exhaust System Validation, S. Rajadurai, M. Guru Prasad, R. Kavin and M. Sundaravadivelu, Commercial Vehicle Engineering Congress, SAE 2014-01-2354, Rosemont, USA, October, 2014.
Non-Linear Thermal Modal Analysis for Hot End Exhaust System, Rajadurai, M. Guru Prasad, R. Kavin and M. Sundaravadivelu, International Journal of Emerging Trends in Engineering Research, 1-6, Vol. 2, No 1 (2014).
Durable Stainless Steel Tubes for Exhaust System, S. Rajadurai, J. Rejin Jose, B. Harinivas, S. Ananth, International Journal of Recent Development in Engineering and Technology, 152-159, Vol 2, Issue 2 ( 2014).
FEA Best Practices Approach, S. Rajadurai, M. Guru Prasad, R. Kavin and M. Sundaravadivelu, International Journal of Recent Development in Engineering and Technology, 58-66, Vol 2, Issue 3 (2014).
Materials for Automotive Exhaust System, S. Rajadurai, M. Afnas, S. Ananth, International Journal of Recent Development in Engineering and Technology, 82-89, Vol 2, Issue 3 (2014).
Carbon Dioxide Reduction on Diesel Engine – “A Lot with a Little”, S. Rajadurai and R.K. Anulatha, International Journal of Science and Advanced Technology, 31-34, Vol. 4, No 8 (2014).
Benchmarking – The First Step for Frugal Engineering, S. Rajadurai and C. Parameshwari, International Journal of Innovative Science, Engineering & Technology, 282-285, Vol. 1, Issue 6 (2014).
CFD Analysis for Flow through Glass Wool as Porous Domain in Exhaust Muffler, S. Rajadurai, Suraj Sukumaran and P. Madhusudhanan, International Journal of Innovative Science, Engineering & Technology, 341-347, 1, Issue 7 (2014).

Product Development Cycle – Past to Present, S. Rajadurai and C. Parameshwari, International Journal of Innovative Science, Engineering & Technology, 398-402, 1, Issue 7 (2014).
Catalytic Reduction of CO₂ in Gasoline Passenger Car, S. Rajadurai and R.K. Anulatha, International Journal of Innovative Science, Engineering & Technology, 376-380, Vol. 1, Issue 8 (2014).
Muffler Development for Diesel Hybrid Vehicle, S. Rajadurai and S. Ananth, International Journal of Innovative Science, Engineering & Technology, 513-519 ,Vol. 1, Issue 9 (2014).
Closing the Gap between Innovative Invention and Effective Industrialization, S. Rajadurai and Reena Mary, International Journal of Economics, Education and Management, 1-15, Vol. 2, Issue 1(2014).
Muffler Optimization for Increased Fuel Efficiency Iterations Using Taguchi Orthogonal Array for Controlling CO₂, Mylaudy S. Rajadurai, Naveen. S, International Journal of Innovative Science, Engineering & Technology, 289-295, Vol. 2, Issue 3 (2015).
Computational Simulation to Ascertain Hot Vibration Test Assembly for Converter Validation, S. Rajadurai, M. Guru Prasad, R. Kavin, M. Sundaravadivelu, and M. Balaji, SAE 2015-26-0214, SIAT, Pune, January, 2015.
Influence of Linear and Parabolic Elements in Structural Rigidity of Converter Mounting Brackets, S. Rajadurai, M. Guru Prasad, R. Kavin, M. Sundaravadivelu, SAE Technical Paper 2015-01-1326
Sound Transmission Loss Measurement Accuracy Requirement in Low Frequency Range, Mylaudy S. Rajadurai, Gokul Raj, S. Mathankumar, International Journal of Recent Development in Engineering and Technology, 01-08, Vol. 4, Issue 5 (2015)
Computational Simulation to Validate Resonator through Bending Moment, Sivanandi Rajadurai, Guru Prasad Mani, Kavin Raja, and Sundaravadivelu Mohan, SAE Technical Paper 2015-01-2290.
Applications of Rapid Prototyping – 3D Printing Technology to Ease Manufacturing and Verification, S. Rajadurai, Naveen. S, Vipin Prakash, Sukanth Kannan, and Gowtham Arumugam, International Journal of Recent Development in Engineering and Technology, 19-22, Vol. 4, Issue 5 (2015).
Partial Zero Emission in Automobile Exhaust Application: Driving Toward a Clean & Green Future, Mylaudy S. Rajadurai, Sundaravadivelu. M, Prakash. K, Gowtham Arumugam, Suraj Sukumaran, International Journal of Recent Development in Engineering and Technology, 10-23, Vol. 4, Issue 6 (2015).
Countermeasures to Reduce Muffler Shell Radiation Noise, S. Rajadurai, R. Gokul Raj, K.J. Rajakumar, International Journal of Innovative Science, Engineering & Technology, 489-496, Vol. 2, Issue 7 (2015).
Methods to Avoid Material Sensitization during Welding for developing Corrosion Resistant Exhaust System, Mylaudy Rajadurai, Naveen. S, Afnas. M, Arun. T, Nirmal Kumar, Surendhar. S, International Journal of Recent Development in Engineering and Technology, 23-36, Vol. 4, Issue 7 (2015).
The Impact of Coupled Fluid Structural Interactive Analysis on Flow Uniformity of Catalytic Converter, Mylaudy S. Rajadurai, Suraj Sukumaran, M. Sundaravadivelu, International Journal of Recent Development in Engineering and Technology, 1-6, Vol. 4, Issue 8 (2015).
Experimental Investigation of Thickness Influencing Acoustic Performance of Sound Absorbing Material, Mylaudy S. Rajadurai, Suraj Sukumaran, P. Madhusudhanan, K. Arun Kumar, International Journal of Innovative Science, Engineering & Technology, 794-798, Vol. 2, Issue 8 (2015).
Carbon Dioxide Reduction in Diesel Power Generator using Modified Charcoal, Mylaudy S. Rajadurai, J. Maya, International Journal of Recent Development in Engineering and Technology,1-5, Vol. 4, Issue 9 (2015).
Effective Methodology for Backpressure Prediction of Hot Exhaust Gas in Cold Flow Bench Test, Mylaudy S. Rajadurai, Madhusudanan. P, Alrin M. Victor, SAE 2016-01-0196.
Criticality of Tube Bending Through CAE Understanding, Mylaudy S. Rajadurai, Guruprasad. M, SAE2016-01-1366.
Effects of Exhaust System Pressure Measurement Probes in Cold Flow Bench and Validation with CFD, Mylaudy S. Rajadurai, P. Madhusudhanan and Alrin M. Victor, 334-339, Vol. 3, Issue 4, (2016).
CO₂ Capture Using Activated Alumina in Gasoline Passenger Vehicles, Mylaudy S. Rajadurai, A. Harish Srinivasa Rao, K. Kamalakannan, International, Journal of Research and Applications, Vol 6, Issue 5, (May 2016).
Reduction of Carbon dioxide Emissions from Diesel Passenger Vehicle Exhaust Tail Pipe by Capturing Method Using Activated Alumina with Analyzed Reactor Chamber, Mylaudy S. Rajadurai, M. Jaikumar, Bandaru Sainath, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Vol 13, Issue 3 (2016).
A System Approach to Dynamic Characteristics of Hanger Rod in Exhaust System, Mylaudy S. Rajadurai, R. Kavin, Rejinjose, Prabhakaran and Rajeshraman, International Journal of Innovative Science, Engineering & Technology, 450-461, Vol. 3 Issue 5, May 2016.
Validation and Optimization of Exhaust Gas Flow Control Parameters to Control CO₂ Emission with the Aid of Pre-heated ZSM-5 Zeolite Supported by Lime Water Testing, Mylaudy S. Rajadurai, K. Kamala Kannan and Maroof Syed Ali .M, Journal of Chemical and Pharmaceutical Research, 265-272, Vol. 8, Issue 5 (2016).
Control of Carbon Dioxide and other Emissions from Diesel Operated Engines using Activated Charcoal, Shaik Sameer, Dr. P. Vijayabalan and Mylaudy S. Rajadurai, International Journal of Current Research, Vol. 8, Issue, 05, 31109-31115, May 2016.
CO₂ Capture by Using Modified ZSM-5 Zeolite in Diesel Powered Vehicle, V. Venkatesh, Dr. M. Jaikumar, Mylaudy S. Rajadurai, Journal of Mechanical and Civil Engineering, 102-107, Vol 13, Issue 3 Ver. II (2016).
Phase Tracking of Resonance Frequency to Avoid Fatiuge Failure, Mylaudy S. Rajadurai, B. Harinivas, D. Karthick, International Journal of Recent Development in Engineering and Technology, 1-7, Vol 5, Issue 6 (2016).
Carbon Dioxide Reduction in Gasoline Engine – A Comparative Study, Mylaudy Rajadurai, J. Maya, International Journal of Innovative Research in Science, Engineering and Technology, 16734-741, Vol 5, Issue 9 (2016).
Manufacturing Elements affecting the Performance & Durability Characteristics of Catalytic Converter, Mylaudy S. Rajadurai, R. Somasundaram, P. Madhusudhanan, Alrin M. Victor, J.Y. Raja Shangaravel, International Journal of Innovative Research in Science, Engineering and Technology, 16742-748, Vol 5, Issue 9 (2016).
Critical Weld Length Durability for Hanger Rod in Exhaust System, Mylaudy S. Rajadurai, R. Kavin, A. Prabhakaran, International Journal of Innovative Science, Engineering & Technology, 325-332, Vol. 3 Issue 10 (2016).
Alignment for BSVI Stipulation Moving Towards Carbon Neutral Earth, Mylaudy S. Rajadurai, S. Naveen, International Journal of Recent Development in Engineering and Technology, 9-14, Vol 6, Issue 3 (2017).
NOx Aftertreatment Using Urea SCR for Tier 4 Final Application, Mylaudy S. Rajadurai, Suraj Sukumaran, International Journal of Innovative Science, Engineering & Technology, 306-312, Vol. 4 Issue 6 (2017).
Effective Technical Competitive Analysis (TCA) in Program Management, Mylaudy S. Rajadurai, S. Shibu Anand, B. Suresh Kumar, International Journal of Recent Development in Engineering and Technology, 8-14, Vol. 7, Issue 11, November 2018.